Puncture-proof wheel on steel rim 1.8 mm, fire red with precision deep-groove ball bearings No valve Hole: 20 mm Hub length: 14 mm Incl. fixing parts.
Tubular supports for sheet-material trolley/stand, available in heights 300 mm, 600 mm and 900 mm and lengths 1,255 mm and 1,655 mm Permanent surface protection Impact- and scratch resistant.
Plastic skid red RL 2002/No. 1795 C For tube diameter 28 mm.
Pneumatic tyre with groove profile on steel rim 1.8 mm, fire red with precision deep-groove ball bearings Light and quiet running Little dirt attraction Hole: 20 mm Hub length: 14 mm incl. fixing parts.
Welded steel construction Suitable for Euro pallets and industrial pallets, but only for types 62 and 64 Insertable separator grids Straight grid with wire mesh, mesh size 100 x 100 mm Permanent surface protection Impact-resistant and scratch-resistant.
Galvanised steel sheet, 1.5 mm Folded over MDF panels.
Shelves of 15 mm wood-based board Incl. hooks, screws and wood Payload 80 kg.
Shelves with load surface of wood-based board 15 mm high rim on long side Impact- and scratch resistant Suitable for shelf trolleys with inclinable shelves.
Additional side walls of wire mesh, mesh size 120 x 120 mm For hanging insertion Rigid walls Permanent surface protection Impact- and scratch-resistant.
Shelf of wood-based board 18 mm thick Incl. angle steel Loading: 80 kg.
Additional side walls of wire mesh, mesh size 120 x 120 mm For hanging insertion Half folding Permanent surface protection Impact- and scratch-resistant.
Welded steel construction With transverse strut in tubular support Useful height: 745 mm Permanent surface protection Impact- and scratch resistant.
Welded steel construction Incl. 4 catching corners and lifting rings Height adjustment by internal spring-loaded bold Loading heights: 650 mm, 605 mm, 555 mm und 505 mm: Add-on frame can be bolted to dolly Permanent surface protection Impact- and scratch-resistant.
Additional side walls of wire mesh, mesh size 120 x 120 mm For hanging insertion Half folding Permanent surface protection Impact- and scratch-resistant.
Shelves with load surface of wire mesh, mesh size 50 x 50 mm 15 mm high rim on long side Impact- and scratch resistant Suitable for shelf trolleys with inclinable shelves.
Galvanised steel sheet, 1.5 mm Folded over MDF panels.
Putting the galvanized distance pieces in the tubes of the tyre rack/trolley you can store wheels with diametre up to 820 mm instead of 650 mm in the second level even if a further level is installed Surface hot galvanised.
Tubular supports for sheet-material trolley/stand, available in heights 300 mm, 600 mm and 900 mm and lengths 1,255 mm and 1,655 mm Permanent surface protection Impact- and scratch resistant.
Trays of 15 mm wood-based board Incl. hooks, screws and wood 45 mm high rim Payload 80 kg.
Insertion of extension tubes between two tyre trolleys/racks creates additional storage levels for tyre storage 2 extension tubes are needed to create a new tyre storage level Total length: 1,220 mm Useful length: 1,130 mm Tube diameter: 26.9 mm Surface hot galvanised.
In exchange for brake castors with thermoplastic standard rubber tyres Available in three sizes Operated on both sides The EasySTOP brake acts on both or on all 4 swivel castors, the pedal is easily returned to the starting point Adjustable braking effect Brakes work in every wheel position The pedal can be operated with either normal or safety footwear.
Material boxes available in two sizes Galvanised Payload 25 kg or 50 kg depending on size of material box.