Puncture-proof wheel on steel rim 1.8 mm, fire red with precision deep-groove ball bearings No valve Hole: 20 mm Hub length: 14 mm Incl. fixing parts.
Tubular supports for sheet-material trolley/stand, available in heights 300 mm, 600 mm and 900 mm and lengths 1,255 mm and 1,655 mm Permanent surface protection Impact- and scratch resistant.
Plastic skid red RL 2002/No. 1795 C For tube diameter 28 mm.
Pneumatic tyre with groove profile on steel rim 1.8 mm, fire red with precision deep-groove ball bearings Light and quiet running Little dirt attraction Hole: 20 mm Hub length: 14 mm incl. fixing parts.
Pneumatic tyre with ribbed profile and roller bearings on steel rim, fire red light and quiet running Little dirt attraction Hole: 20 mm Hub length: 75 mm Incl. fixing parts. For Hand trucks, Hand platform trolleys and Steel-cylinder trucks.
Wheelset consisting of 2 brake castors and 2 fixed castors with roller bearings on steel rims As extra charge and in exchange for thermoplastic standard rubber tyres Pneumatic tyres with ribbed profile Available in three sizes Roller bearings, 150 mm diameter, grey, diameters 200 mm and 230 mm in black Caution: the roller bearings reduce the payload!
Welded steel construction Suitable for Euro pallets and industrial pallets, but only for types 62 and 64 Insertable separator grids Straight grid with wire mesh, mesh size 100 x 100 mm Permanent surface protection Impact-resistant and scratch-resistant.
Galvanised steel sheet, 1.5 mm Folded over MDF panels.
Shelves of 15 mm wood-based board Incl. hooks, screws and wood Payload 80 kg.
Shelves with load surface of wood-based board 15 mm high rim on long side Impact- and scratch resistant Suitable for shelf trolleys with inclinable shelves.
Additional side walls of wire mesh, mesh size 120 x 120 mm For hanging insertion Rigid walls Permanent surface protection Impact- and scratch-resistant.
Shelf of wood-based board 18 mm thick Incl. angle steel Loading: 80 kg.
Grey non-marking electrically conductive thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard High carrying capacity Low noise Low rolling resitance High wear-resistance Temperature-resitant -20°/+80°C 65° Shore A.
Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard High carrying capacity Low noise Low rolling resistance High wear-resistance Resistant to chemicals (oils, gases, acids, solvents and organic subastances) Temperature-resitant -20°/+80°C 65° Shore A.
Additional side walls of wire mesh, mesh size 120 x 120 mm For hanging insertion Half folding Permanent surface protection Impact- and scratch-resistant.
Welded steel construction With transverse strut in tubular support Useful height: 745 mm Permanent surface protection Impact- and scratch resistant.
Welded steel construction Incl. 4 catching corners and lifting rings Height adjustment by internal spring-loaded bold Loading heights: 650 mm, 605 mm, 555 mm und 505 mm: Add-on frame can be bolted to dolly Permanent surface protection Impact- and scratch-resistant.
Additional side walls of wire mesh, mesh size 120 x 120 mm For hanging insertion Half folding Permanent surface protection Impact- and scratch-resistant.
Shelves with load surface of wire mesh, mesh size 50 x 50 mm 15 mm high rim on long side Impact- and scratch resistant Suitable for shelf trolleys with inclinable shelves.
Galvanised steel sheet, 1.5 mm Folded over MDF panels.
Putting the galvanized distance pieces in the tubes of the tyre rack/trolley you can store wheels with diametre up to 820 mm instead of 650 mm in the second level even if a further level is installed Surface hot galvanised.
Tubular supports for sheet-material trolley/stand, available in heights 300 mm, 600 mm and 900 mm and lengths 1,255 mm and 1,655 mm Permanent surface protection Impact- and scratch resistant.