Shelves of 15 mm wood-based board Incl. hooks, screws and wood Payload 80 kg.
Welded steel construction Tubular-steel walls removable Sides insertable Height of tubular-steel walls: 750 mm
Plywood base, film-coated surface upwards (instead of 15 mm wood-based board
Polyurethane tyres on cast aluminium wheel rim with precision deepgroove ball bearings High carrying capacity Low noise High abrasion resistance High cute resistance Low rolling resistance High wear-resistance Temperature-resitant -20°/+80°C 92° Shore A.
Welded steel construction Suitable for Euro pallets and industrial pallets, but only for types 62 and 64 Insertable separator grid Slanting grid with wire mesh, mesh size 100 x 100 mm Surface hot galvanised.
Pipe carrier, diameter 16 mm, 22 mm or 27 mm Length: 305 mm Galvanised Payload 15 kg or 25 kg depending on diameter of pipe carrier.
Tubular supports for sheet-material trolley/stand, available in heights 300 mm, 600 mm and 900 mm and lengths 1,255 mm and 1,655 mm Permanent surface protection Impact- and scratch resistant.
Additional side walls of wire mesh, mesh size 120 x 120 mm For hanging insertion Rigid walls Permanent surface protection Impact- and scratch-resistant.
Pegboard tool panels of steel sheet, 1.25 mm Incl. 2 fixing posts and fixing material For fitting to firmly welded workshop trolleys 1,000 mm loading wide A three sided rim is supplied for firmly welded workshop trolleys without rim Permanent surface protection Impact and scratch proof.
Incl. exchange of 2 sviwel castors against 2 fixed castors 4 sviwel castors with middle wheel allow a turn in place.
Coupling with bolt diameter 30 mm Suitable for all models Incl. spring borne protection of the drawbar eye Permanent surface protection Impact- and scratch-resistant.
Trays of 15 mm wood-based board Incl. hooks, screws and wood 45 mm high rim Payload 80 kg.
Shelves of 15 mm wood-based board Incl. hooks, screws and wood Payload 80 kg.
Trays of 15 mm wood-based board Incl. hooks, screws and wood 45 mm high rim Payload 80 kg.
Welded steel construction Push bar with transverse strut and and black soft tube cover Incl. lever release for mounting to the frame of steel-frame dollies Permanent surface protection Impact- and scratch resistant.
Drawer divider set, galvanised steel sheet Plug-in With 4 long dividers and 12 separators for light and heavy workshop trolleys.
Wheelset consisting of 2 EasySTOP swivel castors and 2 swivel castors In exchange for fixed castors - all sizes Available both for thermoplastic solid rubber tyres, grey, non-marking, for pneumatic tyres, black or elastic solid-rubber tyres, black As a result, the trolley is highly manoeuvrable and can turn on the spot.
Welded steel construction Suitable for Euro pallets and industrial pallets, but only for types 62 and 64 Insertable separator grid Slanting grid with wire mesh, mesh size 100 x 100 mm Surface hot galvanised.
Plastic feet for tyre rack 1 set = 4 feet Bolt-mounted feet Colour white.
Material crate of impact resistant polyethylene Temperature resistant from - 40°C to + 80°C Resistant to acids, oil and alkalis Colour red.
Wooden clipboard with paper grip and pencil holder With tube clamps and fixing screws Portrait or landscape format.
Wheelset comprising 2 brake castors and 2 fixed castors Polyamide tyres with roller bearings, white For mounting on self tipper The wheelset may reduce the payload!
Wheelset consisting of 2 brake castors and 2 fixed castors 96° Shore A with ball bearings on cast aluminium rim As extra charge and in exchange for thermoplastic standard rubber tyres Available in three sizes Brown.
Additional side walls of wire mesh, mesh size 120 x 120 mm For hanging insertion Rigid walls Permanent surface protection Impact- and scratch-resistant.