Produkte

Modular system Base structure with innovative frame section Screwed tubular push bar 2 screwed galvanised connection tubes Load surface and shelves of wood-based board Optional removable shelves for insertion at 120 mm Mesh ends, mesh size 120 x 120 mm Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Welded steel construction With 2 innovative plastic safety handles Bended transverse struts With transparent soft tube cover Toe with antislip covering Permanent surface protection Impact- and scratch-resistant Pneumatic tyres on steel wheel rim or solid-rubber tyres on special plastic wheel rim with precision deepgroove ball bearings and plastic wheel cap.

Welded steel construction 2 support runners Socket with safety catch Load surface of waterproof bonded plywood, surface finish screen printed, anti-slip Permanent surface protection Impact- and scratch-resistant Elastic solid-rubber tyres or polyurethane tyres on cast aluminium wheel rim with precision deepgroove ball bearings Mounted on a single axle.

Modular system Electrostatic discharge execution Base structure of innovative frame section Load surfaces of electrically conductive faced chipboard light grey Set in angle-steel frame, edge = 15 mm high Electrically conductive Permanent surface protection Impact- and scratch-resistant Grey non-marking electrically conductive thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Polyurethane tyres on cast aluminium wheel rim with precision deepgroove ball bearings High carrying capacity Low noise High abrasion resistance High cute resistance Low rolling resistance High wear-resistance Temperature-resitant -20°/+80°C 92° Shore A.

Welded steel construction Tubular-steel walls removable Height of tubular-steel walls: 750 mm

Welded steel construction Galvanised connecting tubes Boltmounted Suitable for wheel diameters of 540 - 820 mm Inserting the shelf means that the middle shelf can then only be used for wheel diameters 540 - 650 mm permanent surface protection Impact- and scratch-resistant.

Welded steel construction 2 support runners Socket with safety catch Load surface of waterproof bonded plywood, surface finish screen printed, anti-slip Permanent surface protection Impact- and scratch-resistant Elastic solid-rubber tyres or polyurethane tyres on cast aluminium wheel rim with precision deepgroove ball bearings Mounted on a single axle.

Sheet steel construction Working surface of beech finish plywood With 80 mm high surround on three sides Permanent surface protection Impact- and scratch-resistant Cupboard with 1 fixed and 2 variable cupboard shelves Carrying capacity 30 kg per cupboard shelf Drawers with sliding runners Central locking system with cylinder lock (Simultaneous locking) Carrying capacity 25 kg per drawer Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Modular system Welded steel construction Permanent surface protection Impact- and scratch-resistant Plug-in stanchion Length of stanchion: 625 mm Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 swivel castors with brakes and 2 fixed castors 1.200 kg carrying capacity: Elastic solid-rubber tyres on cast aluminium wheel rim with precision deepgroove ball bearings with foot guard 2 swivel castors with central foot brake EasySTOP and 2 fixed castors (EasySTOP can be operated on one longitudinal and narrow side).

Welded steel construction With 2 support runners Ball socket without safety catch Platform of wood-based board Stacking corners with locating cups Stacking height: 550 mm Stackable four high when unloaded Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard 2 fixed castors.

Welded steel construction 2 support runners Socket with safety catch Load surface of waterproof bonded plywood, surface finish screen printed, anti-slip Permanent surface protection Impact- and scratch-resistant Elastic solid-rubber tyres or polyurethane tyres on cast aluminium wheel rim with precision deepgroove ball bearings Mounted on a single axle.

Welded steel construciton Railing 220 mm high With reflective films All bicycle trailers are supplied with bolted drawbar with welded-on hemispherical shell and plastic handles The ball socket is welded to the towbar The ball head with clamp is supplied loose for the user to fit to the cycle frame Universal fitting with adaptor for saddle tubes from 26,0 mm - 31,0 mm Maximum load: 40 kg Lean load: 4 kg Load surface of waterproof bonded plywood, surface finish screen printed, anti-slip Permanent surface protection Impact- and scratch-resistant Pneumatic tyres on plastic wheel rim with ball bearings. Bicycle trailer only for internal material-transport.

Welded steel construction Suitable for Euro pallets 1200 x 800 mm Stackable, but do not move when stacked End walls are fitted with vertical tubular bars Side walls open Incl. connecting tube for stabilising the frame Permanent surface protection Impact-resistant and scratch-resistant Can be collapsed or folded to save space when not in use.

Welded steel construction Suitable for Euro pallets 1200 x 800 mm Stackable, but do not move when stacked End walls are fitted with vertical tubular bars Side walls open Incl. connecting tube for stabilising the frame Hot-galvanised Can be collapsed or folded to save space when not in use.

Welded steel construction Suitable for Euro pallets and industrial pallets, but only for type 64 Insertable separator grids Slanting grid with wire mesh, mesh size 100 x 100 mm Permanent surface protection Impact-resistant and scratch-resistant.

Welded steel construction Suitable for Euro pallets 1200 x 800 mm Stackable, but do not move when stacked For subsequent fitting to loaded pallet Frame parts secured by manual clamping function Stabilised by hooking together 2 horizontal frames at top Permanent surface protection Impact-resistant and scratch-resistant Can be collapsed or folded to save space when not in use.

Welded steel oil-tight With galvanised grating Mesh size 30 x 30 mm For 4 drums of 200 l capacity Optional with outlet cock Ground clearance = 100 mm Permanent surface protection Impact- and scratch-resistant 4 feets.

Steel construction with ball head of diameter 47 mm With locking system Reliable engagement with two-wheeled platform Suitable for two-wheeled plattforms with a load capacity of 1.000 - 3.000 kg Elastic solid-rubber tyres with ball bearings.

Modular system Base structure with innovative frame section Load surfaces covered with galvanised sheet (folded over load surface) Load surfaces flush with the frame Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Welded steel construction Trolley nestable Load surface of waterproof bonded plywood, surface finish screen printed, anti-slip Push bar with vertical tubes Permanent surface protection Impact- and scratch-resistantGrey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 swivel castors with brakes and 2 fixed castors.

Welded steel construction Base structure with innovative frame section Working surface of beech finish plywood 80 mm high surround on three sides Usable height: 850 mm Set in angle-steel frame Permanent surface protection Impact- and scratch-resistant Cupboard with 1 fixed and 2 variable cupboard shelves Carrying capacity 30 kg per cupboard shelf Drawers with sliding runners Cylinder lock (simultaneous locking) Carrying capacity 25 kg per drawer Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Welded steel construction Suitable for industry pallets 1200 x 1000 mm Stackable, but do not move when stacked All sides open The stored goods can be accessed from all sides Stabilised by hooking together 2 horizontal frames at top Hot-galvanised Can be collapsed or folded to save space when not in use.

Extremely robust, pulse-welded steel-section construction With rounded corners The steering system is of turnable design with heavy-duty precision deepgroove ball bearings Steering ring with safety stop in accordance with German accident prevention regulations (UVV) Maximum speed: 6 km/h Welded drawbar with retaining system in accordance with German accident prevention regulations (UVV) Drawbar replaceable Standard drawbar eye for 30 mm coupling bolts Compatible towing hitch height: 400 - 600 mm Caution: if the customer does not specify the height of the drawbar jaw, we accept no liability for ease of coupling of the trailer Load surface of waterproof bonded plywood, surface finish screen printed, anti-slip Heavy-duty wheels in robust welded-steel construction with elastic solid-rubber tyres or heavy-duty pneumatic wheels with industrial tread The hubs are fitted with dustproof encapsulated, pre-lubricated bearings in accordance with DIN ISO 355 or 15-1981.