Produkte

Welded tubular steel construction 8 carrier spars per upright Circa carrier-spar length 375 mm Width of trolley continuously adjustable Height of carrier-spars continously adjustable Scale for adjusting arrangement of carrier-spars Load capacitiy per level 40 kg Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 swivel castors, 1 of them with direction lock.

Additional side walls of wire mesh, mesh size 120 x 120 mm For hanging insertion Half folding Permanent surface protection Impact- and scratch-resistant.

Welded steel construction Suitable for Euro pallets and industrial pallets, but only for types 62 and 64 Insertable separator grids Straight grid with wire mesh, mesh size 100 x 100 mm Permanent surface protection Impact-resistant and scratch-resistant.

Sheet steel construction Working surface of beech finish plywood Permanent surface protection Impact- and scratch-resistant Cupboard with 1 fixed and 2 variable cupboard shelves Carrying capacity 30 kg per cupboard shelf Drawers with sliding runners Central locking system with cylinder lock (Simultaneous locking) Carrying capacity 25 kg per drawer Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Welded steel construction Screwed Tilts to 17° or 32° by bolting Shelves with wood-based board Edge 15 mm high Clearance between cross tubes: 125 mm Hole spacing for screwing shelves: 150 mm Suitable for plastic crates 600 x 400 mm (W/D) Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 4 swivel castors, 2 of them with brakes.

Welded steel construction Suitable for Euro and industry pallets Stackable, but do not move when stacked For subsequent fitting to loaded pallet Frame parts secured by manual clamping function Stabilised by hooking together 2 horizontal frames at top Hot-galvanised Can be collapsed or folded to save space when not in use.

Modular system Base structure with innovative frame section Variable shelves of mesh 50 x 50 mm in angle-steel frame For sloping or horizontal insertion Shelf support interval 120 mm Gradient when sloping 15 degrees Edge 15 mm high Tubular push bar welded to one end Trolley galvanised Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Fixed welded angle-steel construction Push/pull bar is flush with the frame when not in use Push/pull bar with soft plastic grip cover black End, side walls and roof with mesh sides 50 x 50 mm Base and shelves of wood-based board Shelf supports for variable insertion at 50 mm intervals Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Modular system Base structure of round pipe Load surface of wood-based board Transverse strut in push bar Permanent surface protection Impact-resistant and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Welded steel construction Suitable for Euro and industry pallets Stackable, but do not move when stacked For subsequent fitting to loaded pallet Frame parts secured by manual clamping function Stabilised by hooking together 2 horizontal frames at top Permanent surface protection Impact-resistant and scratch-resistant Can be collapsed or folded to save space when not in use.

Welded steel construction Railing 220 mm high With reflective films Screwed hand drawbar with plastic handles and stand Load surface and side walls of waterproof bonded plywood, surface finish screen printed, anti-slip Permanent surface protection Impact- and scratch-resistant Pneumatic yres on steel wheel rim with precision deepgroove ball bearings.

Welded steel construciton Railing 220 mm high With reflective films All bicycle trailers are supplied with bolted drawbar with welded-on hemispherical shell and plastic handles The ball socket is welded to the towbar The ball head with clamp is supplied loose for the user to fit to the cycle frame Universal fitting with adaptor for saddle tubes from 26,0 mm - 31,0 mm Maximum load: 40 kg Lean load: 4 kg Load surface of waterproof bonded plywood, surface finish screen printed, anti-slip Permanent surface protection Impact- and scratch-resistant Pneumatic tyres on plastic wheel rim with ball bearings. Bicycle trailer only for internal material-transport.

Welded steel construction Tubular-steel walls removable Height of tubular-steel walls: 750 mm

Pneumatic tyres on steel wheel rim with roller bearing, black (Ø 230 and 200 mm)or grey (Ø 150 mm) Low carrying capacity Good ride comfort Low noise.

Welded tubular steel construction 8 carrier spars per upright Circa carrier-spar length 375 mm Width of trolley continuously adjustable Height of carrier-spars continously adjustable Scale for adjusting arrangement of carrier-spars Load capacitiy per level 40 kg Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 swivel castors, 1 of them with direction lock.

Welded steel construcion Push bar with 2 plastic handles Reversible Lockable Including lever for locking the lifting movement Support with ribbed rubber covering and 4 white rubber studs For diagonal and length wise transport Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard 2 castors on one axle and 2 swivel castors.

Modular system Welded steel construction With waterproof bonded plywood base, surface finish screen printed, anti-slip Permanent surface protection Impact- and scratch-resistant End walls with vertical tubes and horizonal pushbars Hight of end walls: 800 mm Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 swivel castors with brakes and 2 fixed castors 1.200 kg carrying capacity: Elastic solid-rubber tyres on cast aluminium wheel rim with precision deepgroove ball bearings with foot guard 2 swivel castors with central foot brake EasySTOP and 2 fixed castors (EasySTOP can be operated on one longitudinal and narrow side).

Welded steel construction Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 swivel castors with brakes and 2 fixed castors 1.200 kg carrying capacity: Elastic solid-rubber tyres on cast aluminium wheel rim with precision deepgroove ball bearings with foot guard 2 swivel castors with central foot brake EasySTOP and 2 fixed castors (EasySTOP can be operated on one longitudinal and narrow side).

Welded steel construction Suitable for Euro and industry pallets Stackable, but do not move when stacked Grilled, mesh size 100 x 100 mm All sides closed, 1 side wall with fold-down upper half Optional replaceable pallet converter separation grid Permanent surface protection Impact-resistant and scratch-resistant Can be collapsed or folded to save space when not in use.

Plywood base, film-coated surface upwards (instead of 15 mm wood-based board

Welded tubular steel construction 4 carrier spars per upright Circa carrier-spar length 595 mm Width of trolley continuously adjustable Height of carrier-spars continously adjustable Scale for adjusting arrangement of carrier-spars Load capacitiy per level 60 kg Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 swivel castors, 1 of them with direction lock.

Modular system Base structure with innovative frame section Screwed tubular push bar 2 screwed galvanised connection tubes Load surface and shelves of wood-based board Optional removable shelves for insertion at 120 mm Mesh side and ends, mesh size 120 x 120 mm Side wall replaceable and variable removable Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Extremely robust, pulse-welded steel-section construction With rounded corners The steering system is of turnable design with heavy-duty precision deepgroove ball bearings Steering ring with safety stop in accordance with German accident prevention regulations (UVV) Maximum speed: 6 km/h Welded drawbar with retaining system in accordance with German accident prevention regulations (UVV) Drawbar replaceable Standard drawbar eye for 30 mm coupling bolts Compatible towing hitch height: 400 - 600 mm Caution: if the customer does not specify the height of the drawbar jaw, we accept no liability for ease of coupling of the trailer Load surface of waterproof bonded plywood, surface finish screen printed, anti-slip Heavy-duty wheels in robust welded-steel construction with elastic solid-rubber tyres or heavy-duty pneumatic wheels with industrial tread The hubs are fitted with dustproof encapsulated, pre-lubricated bearings in accordance with DIN ISO 355 or 15-1981.

Modular system Base structure with innovative frame section Load surface of wood-based board End and side walls of mesh with size 50 x 50 mm Height of end and side walls: 200 mm End and side walls individually removable Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.