Produkte

Welded steel construction Screwed Tilts to 17° or 32° by bolting Shelves open Edge 27 mm high Clearance between cross tubes: 125 mm Hole spacing for screwing shelves: 150 mm Suitable for plastic crates 600 x 400 mm (W/D) Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 4 swivel castors, 2 of them with brakes.

Welded steel construction Suitable for Euro pallets and industrial pallets, but only for types 62 and 64 Insertable separator grid Straight grid with wire mesh, mesh size 100 x 100 mm Surface hot galvanised.

Welded steel construction Suitable for pallets or cage pallets Incl. catching corners and fastening eyelets 4 galvanised connecting tubes for insert into edges Angle-steel frame stackable on connecting tubes Variable removable Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Grey non-marking electrically conductive thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard High carrying capacity Low noise Low rolling resitance High wear-resistance Temperature-resitant -20°/+80°C 65° Shore A.

Welded tubular steel construction 8 carrier spars per upright Circa carrier-spar length 375 mm Width of trolley continuously adjustable Height of carrier-spars continously adjustable Scale for adjusting arrangement of carrier-spars Load capacitiy per level 40 kg Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 swivel castors, 1 of them with direction lock.

Welded steel construction With 1 innovativ plastic safety handle Toe of sheet steel with edge surrounded on three sides For easy transport of propane gas cylinders with a capacity of 11 kg, Diameter 320 mm Cylinder holder with safety chains Permanent surface protection Impact- and scratch-resistant Pneumatic tyres on steel wheel rim or solid-rubber tyres on special plastic wheel rim with precision deepgroove ball bearings and plastic wheel cap.

Fixed welded angle-steel construction Push/pull bar is flush with the frame when not in use Push/pull bar with soft plastic grip cover black End, side walls and roof of galvanised steel sheet Base and shelves of wood-based board Shelf supports for variable insertion at 100 mm intervals Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Welded steel construction With 2 innovative plastic safety handles Toe of sheet steel Toe and bars with hollow rubber profile Permanent surface protection Impact- and scratch-resistant Pneumatic tyres on steel wheel rim or solid-rubber tyres on special plastic wheel rim with precision deepgroove ball bearings and plastic wheel cap.

Welded steel construction Suitable for Euro pallets 1200 x 800 mm Stackable, but do not move when stacked All sides open The stored goods can be accessed from all sides Stabilised by hooking together 2 horizontal frames at top Hot-galvanised Can be collapsed or folded to save space when not in use.

Modular system Base structure with innovative frame section Load surface and end walls of waterproof bonded plywood, surface finish screen printed, anti-slip Permanent surface protection Impact- and scratch-resistant Elastic solid-rubber tyres on cast aluminium wheel rim with precision deepgroove ball bearings with foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Toolbox of 1 mm sheet Incl. lockable lid With piano hinge For attaching to trucks Permanent surface protection Impact resistant and scratch resistant.

Welded steel construction With 1 innovativ plastic safety handle Toe of sheet steel with edge surrounded on three sides For easy transport of steel cylinders with a capacity of 20, 40 or 50 l Diameter 210 – 250 mm Cylinder holder with safety chains Permanent surface protection Impact- and scratch-resistant Pneumatic tyres on steel wheel rim or solid-rubber tyres on special plastic wheel rim with precision deepgroove ball bearings and plastic wheel cap.

Modular system Base structure with innovative frame section Screwed tubular push bar 2 screwed galvanised connection tubes Load surface of wood-based board Optional removable shelves for insertion at 120 mm intervals Mesh sides and ends, mesh size 120 x 120 mm Side walls replaceable and variable removable Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Modular system Base structure with innovative frame section Load surface of wood-based board End and side walls of mesh with size 50 x 50 mm Side wall 500 mm high and removable Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Welded steel construction With reflective films Drawbar with safety handles and soft tube cover With turntable steering and ball bearing steering rings Automatic parking brake acting on front wheels Automatically damped return to rest position Loading surfaces of waterproof bonded plywood, surface finish screen printed, anti-slip Permanent surface protection Impact- and scratch-resistant Pneumatic or solid-rubber tyres on special plastic wheel rim with precision deepgroove ball bearings.

Welded steel construction With 4 pieces push-fit tubular steel stanchions, galvanised Length 610 mm Clear depth between the stanchions: 615 mm Centre free for loading by crane or stacker truck Permanent surface protection Impact-and scratch-resistant 2 centre wheels of elastic solid-rubber or polyurethane wheels 360 x 60 mm Plus 1 swivel castor at each end wall with wheel brake, diameter 200 x 50 mm Elastic solid-rubber or polyurethane tyres with precision deepgroove ball bearings with foot guard.

Tubular supports for sheet-material trolley/stand, available in heights 300 mm, 600 mm and 900 mm and lengths 1,255 mm and 1,655 mm Permanent surface protection Impact- and scratch resistant.

Modular system Base structure with innovative frame section Load surface of wood-based board End wall of mesh with size 50 x 50 Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Modular system Welded steel construction With waterproof bonded plywood base, surface finish screen printed, anti-slip Permanent surface protection Impact- and scratch-resistant End walls with vertical tubes and horizonal pushbars Hight of end walls: 800 mm Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 swivel castors with brakes and 2 fixed castors 1.200 kg carrying capacity: Elastic solid-rubber tyres on cast aluminium wheel rim with precision deepgroove ball bearings with foot guard 2 swivel castors with central foot brake EasySTOP and 2 fixed castors (EasySTOP can be operated on one longitudinal and narrow side).

Welded steel construction With 2 innovativ plastic safety handles Toe of sheet steel with edge surrounded on three sides For easy transport of steel cylinders with a capacity of 20 l Diameter 205 mm Cylinder holder with safety chains Permanent surface protection Impact- and scratch-resistant Pneumatic tyres on steel wheel rim or solid-rubber tyres on special plastic wheel rim with precision deepgroove ball bearings and plastic wheel cap.

Welded steel construction Suitable for pallets or cage pallets Incl. catching corners and fastening eyelets Permanent surface protection Impact- and scratch-resistant Elastic solid-rubber tyres on cast aluminium wheel rim with precision deepgroove ball bearings with foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Modular system Base structure with innovative frame section Base, shelves and tray of wood-based board Shelves and tray replaceable and variable removable Tray height 45 mm inside and 60 mm outside Permanent surface protection Impact- and scratch-resistant Grey non-marking thermoplastic rubber tyres on plastic wheel rim with precision deepgroove ball bearings Thread guard and foot guard 2 EasySTOP swivel castors and 2 fixed castors.

Welded steel construction Suitable for Euro pallets 1200 x 800 mm Stackable, but do not move when stacked All 4 sides with diagonal tubes running from bottom corners to meet at top centre For subsequent fitting to loaded pallet Permanent surface protection Impact-resistant and scratch-resistant Can be collapsed or folded to save space when not in use.

Welded steel construction With reflective films Removable end walls of tubular grid End walls screwed Height of tubular grid walls: 750 mm Drawbar with safety handles and soft tube cover With turntable steering and ball bearing steering rings Automatic parking brake acting on front wheels Automatically damped return to rest position Loading surfaces of waterproof bonded plywood, surface finish screen printed, anti-slip Permanent surface protection Impact- and scratch-resistant Pneumatic or solid-rubber tyres on steel wheel rim with precision deepgroove ball bearings.